PARTS

Sort by:
BATTEN TIPS

BATTEN TIPS

10,00
Need to repair a broken batten? Order replacement parts here. Batten tips are available in tapered sections of 10, 20, 30, 40 and 50 cm. Tip lengths are 100cm. Contact...
BATTEN TUBES

BATTEN TUBES

15,00
Need to repair a broken batten? Order replacement parts here. Glass Tubes are available in 11mm and 14mm and Carbon Tubes in either 30 or 100% Carbon. Tube lengths are...
BATTEN JOINER

BATTEN JOINER

5,00
The TRIBAL ferrule batten joiner is a plastic connector for the battenparts used in our sails. This connector joins the front part of the battens with the end pieces, and...
BATTEN TENSIONER

BATTEN TENSIONER

5,00
Our sails are supplied standard with these TRIBAL sail batten tensioners with a stainless steel screw, and are used to apply the proper tension to each batten in your sail...
Spacers

Spacers

4,00 – €14,00 EUR
To tune the battens on your new TRIBAL Race sail you may need to add some spacers in front of the cambers. We supply all our sails standard with a...
CAMBERS
52 CAM47 CAMRDM CAM

CAMBERS

15,00
All TRIBAL sails can be rigged on RDM, SDM or MDM masts. Sails making use of a mast length of 430 and over are supplied standard with SDM Cambers, and...
BATTEN TENSIONER SCREW

BATTEN TENSIONER SCREW

4,00
This batten tensioner screw goes inside the batten tensioner in the sail  and is then screwed in further or less far to increase/decrease batten tension using a Batten Tensioner Key...
BARREL NUTS
9 mm12 mm

BARREL NUTS

5,00
The brass 9mm and 12mm M6 threaded barrel nuts in your Tuttle Box and Power Base fins might need to be replaced after repeated use due to stripped threads. The...
DOWNHAUL PULLEY

DOWNHAUL PULLEY

10,00
This high performance Triple downhaul Pulley is used standard in the TRIBAL sail range, stainless steel with 3 rollers for easy rigging. Item is sold per piece. 
US BOX FIN SCREW SET

US BOX FIN SCREW SET

5,00
This US Box fin screw and plate comes as a set and includes a screw and nut plate to fix fins in the rail of US-box systems in windsurfing boards....
BATTEN TENSIONER KEY

BATTEN TENSIONER KEY

10,00
This custom batten tensioner key is supplied standard with each TRIBAL sail and is required to apply the proper tension to each batten in your sail with a special batten...
HEAD PIN

HEAD PIN

10,00
The Head Pin is used most commonly in the production of our TRIBAL windsurfing sails. This plug in the top of your sail allows the head of the sail to...
HEAD CAP

HEAD CAP

5,00
The TRIBAL Windsurf Sail Head Cap is vario-top compatible and may be used to replace the Head Pin most commonly used in windsurfing sails and will fit most sails with...